Boil TangGuo
Auther：473
Pubdate：2019-12-28 03:32:35
Interlayer pot, we often use interlayer pot from the structure can be divided into vertical, vertical mixing and tiltable, tiltable mixing interlayer pot. Customers can choose vertical or tiltable according to the needs of processing products, or with or without stirring, models from 50, 100... Model 1000 varies, customers can choose a suitable volume of the product according to their daily output, detailed product parameters and product price welcome you to call for details.
Maintenance:
1, steam leakage pipe and pipe joint, when the screw nut does not solve the problem, should add or replace packing.
2, pressure gauge and safety valve should be regularly checked, in case of failure timely replacement and repair.
3, After 50 hours of use, remove the lubricating oil, flush with kerosene or diesel, and add 30#--40# clean oil. After 150 hours of use, change the oil for the second time.
4, anti-rust oil peeling, should be timely brush, paint outside the pot, x55-3 aluminum powder vinyl water-resistant paint is recommended.
5, After using the pot for 5 years, it is recommended to conduct safety hydrostatic test. After that, the interval time for hydrostatic test shall be conducted according to the requirements of the technical departments in various regions.
Pressure P water for hydraulic test shall be determined as follows:
When rated working pressure P < 0.6mpa, P water = 0.15mpa;
When rated working pressure P = 0.6-0.8mpa,
P water =P forehead + 0.3mpa
6. The outer layer of the pot is made of steel plate from 4.0 to 5.5 mm thick. The steel size is A3.
