Boil TangGuo
Auther：393
Pubdate：2019-12-28 03:32:46
The interlayer pot is mainly composed of the pot body and the bracket. The pot body is a double-layer structure form composed of the inner shape of the pot body. The middle interlayer is added with heat conduction oil or water. Electric heating interlayer pot 380V electric power as the heat source, interlayer pot installed electric heating rod, electric heating couple and heat conduction oil (self-matching), up to 320 degrees, with electric control box control, internal equipped with temperature control system. Electric heating sandwich pot with large heating area, uniform heating, high thermal efficiency, liquid boiling time is short, easy to control the heating temperature.
Note:
1. The steam pressure shall not exceed the quota working pressure for a long time.
2. when the steam should be slowly open the steam valve, until the pressure is required, the condensate outlet cut-off valve, such as equipped with a trap, should always open the valve; If there is no steam trap, first open the valve until there is a steam overflow and then turn down the valve, keep the degree of opening until there is a small amount of water vapor overflow.
3. The safety valve can be adjusted according to the pressure of steam used by the user.
4. steam pot in the process of use, should often pay attention to the change of steam pressure, with the admission valve timely adjustment.
5. after stopping the air intake, should be the bottom of the pot straight mouth cock open, put the remaining water.
6. Pour oil into each rotating part before using the tilting and stirring sandwich pot; Stirring sandwich pot on the surface of the parts, it is recommended to use cooked vegetable oil; 30#- 40# machine oils are used elsewhere.
