How to know the operating principle of the rolling kneading machine
Auther：1066
Pubdate：2019-09-22 09:38:35
I. loading:
Cover the cylinder cover and screw the suction hose into the suction connector. Then press the suction button to start suction. When the suction is finished, press the suction stop button, unscrew the suction connector and replace the cover to complete the loading process.
Ii. Operation
According to the product process, process parameters are set on the man-machine interface. The process parameters of each product include total rolling time, forward turning time, reverse time, pause time, rolling and kneading mode, rolling and kneading speed, the time of adding auxiliary materials for the first time, the time of adding auxiliary materials for the second time, and the time of standing after rolling and kneading. Some (0~29) a total of 30 procedures (that is, the process parameters of 30 products) can be memorized.
When the rolling mode is set to breathing and rolling, the rolling machine will conduct forward and reverse under vacuum state and pause under normal pressure state. Namely: start - > forward (vacuum to set the vacuum degree, and maintain) to suspend (vacuum, maintain normal pressure to suspend the - > inversion (vacuum to set the vacuum degree, and maintain) to suspend (vacuum, maintain normal pressure to suspend the - > forward (vacuum to set the vacuum degree, and maintain) to suspend (vacuum, maintain normal pressure to suspend the... Stop after the first and second adding time, and the alarm signal light will be on. When the worker finishes adding the material cover, press the finish button to keep the rolling and kneading machine running until the total rolling and kneading time is up.
When setting the rolling mode as vacuum rolling, the rolling and kneading machine will be in a vacuum state: start (vacuum and keep the vacuum until the total rolling time) → forward rotation → pause → reverse → pause → forward rotation →... Stop after the first and second feeding time, and the alarm signal light will be on. When the worker finishes feeding, press the feeding end button to keep the rolling and kneading machine running until the end of the total time.
When setting the mode of rolling and kneading as normal, the rolling and kneading machine will start → forward rotation → pause → reverse → pause → forward rotation →... Stop after the first and second feeding time, and the alarm signal light will be on. When the worker finishes feeding, press the feeding end button to keep the rolling and kneading machine running until the end of the total time.
In addition, the drive device of the machine adopts frequency conversion speed regulation, which can be stepless adjusted between fast (12 RPM) and slow (1 RPM) at any time as required.
Third, discharging
After the total time of rolling and kneading, the drum will automatically stop, and keep the vacuum state in the drum and continue to time, until the set standing time is up, send an alarm signal, indicating that the operator can open the cover and take out the materials in the drum. At this time, the vacuum can be eliminated by pressing the vacuum elimination button. At this time, the cover of the drum can be removed, and then the unloading button can be pressed. The drum rotates in the direction of discharging (clockwise), so that the meat can be sent out by itself and fall into the meat cart and other containers below the drum mouth, completing the whole process.
